Fast Heat Up" Function - AEG B 89092-4 Instruction Booklet

"Fast Heat Up" function

(Booster)
After a cooking function has been selected and
the temperature has been adjusted, the cavity will
gradually heat up until the selected temperature
is reached. This will take from 10 to 15 minutes,
depending on selected function and temperature.
If it is necessary to reach the required temperature
in a shorter time, the fast heat up function can be
used.
1. Switch the oven on by touching the "ON/
OFF" control
2. Set the required cooking function and
temperature as described in the previous pages.
3. Set the temperature by touching control
or .
4. Touch the "Fast Heat Up Function" control
. The temperature display shows "FHU"
(Fig. 18).
5. If you touch the "Cooking Function" control
, the temperature display reverts to the
selected temperature and symbol " " flashes
for 5 seconds (Fig. 19). During this intervel,
you can adjust the temperature setting by
touching control
6. When the required temperature is reached,
the Electronic Control beeps for a short time,
and the temperature display reverts to the
selected temperature.
This function can be used with any cooking
function or temperature.
.
or .
Fig. 18
Fig. 19
17