Programming The Oven - AEG B 89092-4 Instruction Booklet

Programming the Oven

How to set the minute
minder
1. Touch the "Time Function" control
symbol flashes near the "Minute Minder"
symbol and the time display shows "0.00"
(Fig. 10).
2. Symbol will flash for 5 seconds. Within
this time, touch control
required time (Fig. 11). Maximum time is 23
hours 59 minutes. After another 5 seconds
after you have set the time, the symbol
stops flashing. This means that the setting
has been stored in the Electronic Control
memory and that the countdown started.
3. When the programmed time has elapsed, you
hear an acoustic alarm while symbol
flashes and the time display shows "0.00".
4. To switch off the acoustic alarm, touch any
control.
The oven will NOT switch off if in use.
The Minute Minder function can also
be used when the oven is off.
To change the Minute Minder setting
Touch the "Time Function" control
symbol flashes near the "Minute Minder"
symbol . It is now possible to change the
Minute Minder setting by touching control
or (Fig.11).
To cancel the Minute Minder:
Touch time function control
flashes near the "Minute Minder" symbol
Then touch control
shows "0.00".
. The
to select the
: the
: the symbol
until the time display
.
Fig. 10
Fig. 11
13