Integrated Peripherals - ECS P55H-AK Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
SATA Configuration
Onboard SATA Mode
SATA 6Gb/s Controller Mode
eSATA 6Gb/s Controller Mode
Onboard AUDIO Function
Onboard LAN Function1
Onboard LAN Function2
Onboard LAN Boot ROM
USB Functions
Legacy USB Support
Onboard USB 3.0 Controller
: Move
F1: General Help
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration.
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
SATA 6Gb/s Controller Mode (AHCI)
Use this item to choose SATA 6Gb/s controller mode.
eSATA 6Gb/s Controller Mode (AHCI)
Use this item to choose eSATA 6Gb/s controller mode.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio device.
Onboard LAN Function1~2 (Enabled)
Use this item to enable or disable the onboard LAN1~2 function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB device.
Onboard USB 3.0 Controller (Enabled)
Use this item to enable or disable onboard USB 3.0 controller.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
IDE
Enhanced
AHCI
AHCI
Enabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
Help Item
Options
IDE
RAID
AHCI
Disabled
37