Installing Memory Modules - ECS P55H-AK Manual

12
1. To achieve better airflow rates and heat dissipation, we suggest that
you use a high quality fan with 3800 rpm at least. CPU fan and
heatsink installation procedures may vary with the type of CPU fan/
heatsink supplied. The form and size of fan/heatsink may also vary.
2. DO NOT remove the CPU cap from the socket before installing a
CPU.
3. Return Material Authorization (RMA) requests will be accepted
only if the motherboard comes with the cap on the LGA1156 socket.

Installing Memory Modules

This motherboard accommodates four memory modules. It can support four 240-pin
DDR3 2400 (OC)/ DDR3 2200 (OC)/DDR3 2133 (OC)/DDR3 2000 (OC)/DDR3
1800 (OC)/1600 (OC)/1333/1066
DDR3 SDRAM memory module table
Memory module
You must install at least one module in any of the four slots. Total memory capacity
is 16 GB.
The four DDR3 memory sockets (DDR3_1, DDR3_2, DDR3_3 and DDR3_4) are
divided into two channels and each channel has two memory sockets as following:
Channel A: DDR3_1, DDR3_3
Channel B: DDR3_2, DDR3_4
Mode
1 DIMM
1 DIMM
2 DIMMs
3 DIMMs
3 DIMMs
4 DIMMs
Due to Intel CPU spec definition, the system will not boot if only one
DIMM is installed in DDR3_2 or DDR3_4. Follow the table above for
recommended memory configuration.
SDRAM. The total memory capacity is 16 GB.
Memory Bus
DDR3 2400 1200 MHz
Recommend memory configuration
Sockets
DDR3_2 DDR3_1
-- Populated
-- --
-- Populated
Populated Populated
-- Populated
Populated Populated
Installing the Motherboard
DDR3_4 DDR3_3
-- --
-- Populated
-- Populated
-- Populated
Populated Populated
Populated Populated