Electronically Shifted Transfer Case Operating; Information/Precautions (4 Position Switch); If Equipped - Dodge Ram Truck 2008 Owner's Manual

306 STARTING AND OPERATING
4. After the desired position indicator light is ON (not
flashing), shift transmission back into gear (release clutch
on manual transmissions).
NOTE: If steps 1 or 2 of either the Preferred or Alternate
Procedure are not satisfied prior to attempting the shift or
if they no longer are being met while the shift attempt is
in process then the desired position indicator light will
flash continuously while the original position indicator
light is ON, until all requirements have been met.
NOTE: The ignition key must be ON for a shift to take
place and for the position indicator lights to be operable.
If the key is not ON then the shift will not take place and
no position indicator lights will be on or flashing.
NOTE: If your are leaving your vehicle stored for longer
than 21 days, refer to the section on "Vehicle Storage."

Electronically Shifted Transfer Case Operating

Information/Precautions (4 Position Switch) — If
Equipped
Transfer Case Switch
This is an electric shift transfer case and is operated by
the 4WD Control Switch (Transfer Case Switch), which is
located on the instrument panel.