Using The Panic Alarm; General Information - Dodge Ram Truck 2008 Owner's Manual

2008
Hide thumbs Also See for Ram Truck 2008:
Table of Contents

Advertisement

3. Continue to hold the UNLOCK button, wait at least
four seconds, but no longer than 10 seconds, then press
and hold the LOCK button. Release both buttons at the
same time.
4. To reactivate this feature, repeat the above steps.

Using The Panic Alarm

To activate the PANIC mode while the ignition is OFF,
press and release the PANIC button on the RKE trans-
mitter once. When the PANIC mode is activated, the
interior lights will illuminate, the headlamps and parking
lights will flash, and the horn will sound.
To cancel the PANIC mode press and release the PANIC
button on the transmitter a second time, after five sec-
onds. Panic mode will automatically cancel after three
minutes, or if the vehicle is started and exceeds 15 mph
(24 km/h). During the PANIC Mode, the door locks and
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
remote keyless entry systems will function normally.
PANIC mode will not disarm the Security Alarm System
on vehicles so equipped.

General Information

This device complies with part 15 of FCC rules and with
RS-210 of Industry Canada. Operation is subject to the
following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be
received including interference that may cause undesired
operation.
NOTE:
Changes or modifications not expressly ap-
proved by the party responsible for compliance could
void the user's authority to operate the equipment.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents