Rear Panel Connections - dbx DriveRack 480 User Manual

™
DriveRack
Section 8
480R Remote Controller
The 480R Remote Controller is the ideal complimentary tool to the 480, 481, 442 and 482
DriveRacks. The 480R can act as the Master unit controller in a DriveRack™ network system.
The 480R's system Network Access keypad and System mute button make communication and
editing of other DriveRack™ units a breeze. In addition, the 32 Hot Key instant access buttons
grant the user instant access to any editing screen page of any unit in the DriveRack™ network
and the ability to edit graphic equalizer settings as well.
The 480R Remote Controller ships with the included 480P power supply. The 480P is a single
rack space unit that supplies the 480R with power. The 480P is also used to link the 480R with
other units in a Network environment.
8.1 Rear Panel Connections (480R)
DB-9 and RJ 45 Connectors
Either of these connectors can be used to send and receive information from other DriveRack™
units in the network system via the 480P. Cable lengths 480R to 480P - 300 feet max. 500 feet
with dbx proprietary cable. 480P to Network - Up to 4000 feet.
RTA Microphone Input
This input is used to insert a microphone for use with the real time audio analyzer.
Phantom Power Switch
The Phantom power switch is used to engage or turn off the 48V phantom power.
MIDI In and Out/Thru Connectors
These connectors provide MIDI functionality to the 480 DriveRack™. The In, Out and Thru jacks
allow you to use the 480R DriveRack™ at any point in the MIDI chain.
Warning
The 480R can only be powered by the included 480P power supply. NEVER unplug the dbx
480R remote from the dbx 480P power supply while the 480P is powered up. To properly dis-
connect the 480R, turn off the power on the 480P and then unplug the 480R. Failure to do so
may result in damage to the 480P and/or 480R.
®
DriveRack™ User Manual
86