Insufficient Soundfont Cache; Problems With Joysticks - Creative Platinum eX User Manual

Insufficient
SoundFont
Cache
The trade-off of a smaller
SoundFont file is its lower
sound quality.
Problems With
Joysticks
• obtaining the most current BIOS for your motherboard from the manufacturer's web site*.
*Content in these web sites is controlled by other companies. Creative bears no responsibility for
information or downloads obtained from them. This information is provided only as a convenience to
you.
There is insufficient memory to load SoundFonts.
This may occur when a SoundFont-compatible MIDI file is loaded or played while insufficient memory
has been allocated to SoundFonts.
To allocate more SoundFont cache:
On the Options tabbed page of the SoundFont Control applet, move the SoundFont Cache slider to the
right.
The amount of SoundFont cache you can allocate depends on the system RAM available. Your computer
may slow down if the amount of cache used is too high.
If there is still insufficient system RAM available:
Do one of the following:
On the Configure Banks tabbed page of the SoundFont Control applet, select a smaller SoundFont
bank from the Select Bank box.
Increase the system RAM on your computer.
The joystick port is not working.
The audio card's joystick port may be conflicting with the system's joystick port.
To solve this problem:
Disable the audio card's joystick port and use the system port instead. Do the following:
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the System icon.
3. In the System Properties dialog box, click the Device Manager tab.
Troubleshooting & FAQ's B-8