Audigy Extension Card; External Audigy Drive - Creative Platinum eX User Manual

SB1394 Interfaces
The 6-pin SB1394 connector/
port has a 2 watt maximum
power output. Connect only one
high power usage device such as
an IEEE 1394 hard disk and
CD-RW drive to this port unless
it is self-powered.
Interfaces
Audigy Extension
card
External Audigy
Drive
Inputs and outputs on
front panel
One 2 x 5 pin Internal SB1394 connector on card for connection to the Audigy Extension card
One 6-pin SB1394 connector/port on rear bracket
VOL_CTRL 1 x 4 pin header
PC_SPK (PC speaker) 1 x 2 pin header
AUD_EXT 2 x 20 pin header for connection to the Audigy Extension card
JOYSTICK 2 x 8 pin header for connection to the Audigy Extension card
AUD_EXT/Joystick 2 x 32 pin header for connection to the Sound Blaster Audigy card
One 2 x 5 pin Internal SB1394 connector for connection to the Sound Blaster Audigy card
One 6-pin SB1394 connector/port on rear bracket for connection to the external Audigy Drive
One 44-pin DB connector for connection to the external Audigy Drive
One 15-pin DB Joystick/MIDI connector attached to the Audigy Extension cable
Two RCA jacks for coaxial SPDIF input and output
One headphone output with auto detection via ¼" stereo jack with volume control
General Specifications A-5