Installing Hardware
Installation Steps
Step 1: Prepare the
external Audigy
Drive
Turn off the main power supply
and disconnect your computer's
power cord. Systems using an
ATX power supply unit with soft
power off may still be powering
the PCI slot. This can damage
your audio card when it is
inserted into the slot.
The rubber feet may differ in
some countries.
1. Stick the four rubber feet to the underside in each corner of the external Audigy Drive as shown in
Figure 2-1.
2. Place the external Audigy Drive near your computer.
Figure 2-1: Sticking rubber feet
Installing Hardware 2-2