Connecting A Pc; Setting Audio Input; Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp Aquos LC46D65E Operation Manual

Connecting a PC

Connecting a PC
HDMI Connection
PC
HDMI-certified cable
PC
ø 3.5 mm stereo minijack cable
DVI/HDMI cable
* When using the HDMI2 terminal, you must select the proper item in
the "PC Audio Select" menu depending on the type of HDMI cable
connected (Refer to the right column for details).
Analogue Connection
PC
ø 3.5 mm stereo minijack cable
DVI/RGB conversion cable
PC
ø 3.5 mm stereo minijack cable
* When using the EXT4 terminal, you must select "EXT4 (RGB)" in the
"PC Audio Select" menu (Refer to the right column for details).
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 39 for a list of PC signals compatible with the TV.
• A Macintosh adaptor may be required for use with some Macintosh
computers.
• When connecting to a PC, the input signal type is automatically
detected except 1,024 g 768 and 1,360 g 768 signals.
36
HDMI1, 2* or 3
HDMI2*
RGB cable
EXT4*
EXT4*

Setting audio input

Option
PC Audio Select
When using the EXT4 terminal or HDMI2 terminal, you must
select which terminal uses the AUDIO (R/L) jack for analogue
audio input.
Item
HDMI2: When connecting devices (including a PC) with DVI/HDMI
cable to the HDMI2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
EXT4 (RGB): When connecting a PC to the EXT4 terminal, and
inputting analogue audio signals from the AUDIO (R/L) jack.
NOTE
• You must set this to "EXT4 (RGB)" when connecting
devices (including a PC) with an HDMI-certified cable to the
HDMI2 terminal. If "HDMI2" is set, there will be no sound
output.
Displaying a PC image on the
screen

Selecting the picture size

You can select the picture size.
1
Press f.
• The "WIDE MODE" menu displays.
2
Press f or a/b to select a desired item on the
menu.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
EXAMPLE
Normal
Item
Full: An image fully fills the screen.
Cinema: For letterbox pictures. Bars may appear on the
top and bottom with some programmes.
Normal: Keeps the original aspect ratio in a full screen
display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
NOTE
• Refer to page 30 for AV signals (See below).
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50Hz)/1080i
• The ANALOGUE RGB terminal (PC) (EXT4) is not
compatible with 480i/576i/1080p signals.
Full