Software Maintenance; Introduction; Upgrading Wireless Phones - Avaya IP Office Installation And Configuration Manual

Software Maintenance

Introduction

3600 Series Wireless Phones
The wireless phones use proprietary software programs. The software versions that are running on the
wireless phones can be displayed during power on by holding down Power On/Start Call.
Avaya or its authorized dealer will provide information about software updates and how to obtain the
software (for example, downloading from a web site).
AVPP
The AVPP uses proprietary software programs. The software versions that are running on the system
components can be displayed via the System Status screen.
Avaya, or it authorized dealer, will provide information about software updates and how to obtain
software, for example; downloading from a web site.
At startup, the AVPP uses TFTP to check the software version it is running against the version in the
TFTP location. If there is a discrepancy, the AVPP will download the version in the TFTP location. For
more information about using TFTP, see the Setup and Administration guide for your vendor's IP system.

Upgrading Wireless Phones

After software updates are obtained, they must be transferred to the appropriate location in the LAN to
update the code used by the wireless phones.
The wireless phones allow over-the-air transfer of software updates from the designated TFTP server to
the wireless phones. The downloading function in the wireless phone checks its software version every
time the wireless phone is turned on. If there is any discrepancy the wireless phone immediately begins
to download the update.
Wireless Installation and Configuration Guide Page 54
IP Office [15-601082] Issue [1] (1 June 2006)