Preparing To Install Dnm; Customer Pre-Installation Checklist; Understanding Pcanywhere Security - Avaya DEFINITY Installation And Getting Started Manual

DNM-NT/Windows 2000 4.0 Installation and Getting Started
2

Preparing to Install DNM

2

Customer Pre-Installation Checklist

Customers must complete all of the pre-installation tasks before DNM can be installed or
upgraded.
Note:

Understanding pcAnywhere Security

Before you install a copy of Symantec's pcAnywhere on any of your computers, read this
section.
!
Customers are responsible for the security of their data network and for preventing
unauthorized individuals from accessing it. Therefore, exercise caution when using
Install or upgrade Windows NT/Windows 2000 platform.
1
Refer to "System Requirements" on page 24
Understanding pcAnywhere
Connect the DPA computer's serial connection to the managed nodes.
2
Connect the DPA computer's TCP/IP connection to the NT/Windows 2000 system
3
through the local area network (LAN) or the wide area network (WAN). Refer to the
vendor documentation.
Verify that the updated PA001 Administration Request form (Rev. 10/01) is
4
completed and faxed to the Technical Services Center (TSC).
After the DNM installation, system administrators can execute the appropriate
tasks in Chapter 4, "System
SECURITY ALERT:
and the vendor documentation. (See also
Security)
Administration".
December 2001
Page 26