Drawing Shapes - Brother PE-Design 8.0 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)

Drawing Shapes

Rectangles, rectangles with rounded corners, and curved patterns (regular circles, ovals, arcs, fan shapes,
and arc & strings) can be drawn by using the Rectangle, Circle or Arc tools.
b
Memo:
• You can change the color and sew type either before or after drawing the shape.
c
"Setting the thread color and sew type" on page 94.
• You can also use the settings in the Sewing Attribute Setting dialog box to define other attributes of the
shape.
c
"Specifying sewing attributes" on page 96.
About rectangle, circle and
arc
Rectangle
Circle Oval
Fan shape
All of these patterns, except arcs have an outline
and a inside region, and can independently be
assigned different sewing attributes. Arcs are simple
outlines.
a
Note:
When drawing a shape with this tool, select
the shape before drawing. You cannot, for
example, draw a circle, then change it to an
arc afterward.
70
Arc
Arc & string
Drawing rectangle, circle or
arc Shape
1.
Click on the Tool Box.
→ Six buttons appear
2.
Click the button for the shape to be drawn.
→ The Sewing Attributes bar appears.
3.
Drag the pointer to draw the shape.
■
Rectangle
The point where you start dragging is considered a
corner of the rectangle. The point where the mouse
button is released is the diagonally opposite corner
of the rectangle.
b
Memo:
To draw a square, hold down the
while dragging the pointer.
■
Rectangle with rounded corners
Click to view the current corner radius setting
in the Edge radius selector.
To change the radius of the corners, click the Edge
radius selector, and then type the desired radius
and press the key, or select the desired
Enter
value.
.
Shift key