Brother PE-Design 8.0 Instruction Manual page 32

(4) Click in the Line sew type selector, and
then click Zigzag Stitch.
(5) Click the start point 1, and then double-
click the end point 2.
2
Draw the leaf on the right.
As with the stem, we will specify the color and
sew type, then draw the shape. This time,
since the shape will have a region, we will also
specify the color and sew type for the region.
(1) Click , then
(2) Click for line sewing, and then click
LIME GREEN in the color palette.
(3) Click in the Line sew type selector, and
then select Zigzag Stitch.
(4) Click for region sewing, and then click
LIME GREEN in the color palette.
(5) Click in the Region sew type selector,
and then select Fill Stitch.
To specify whether the color is being selected
for line sewing or region sewing, click a Color
button, or select the type of sewing here.
(2) (3) (4)
(1)
(1)
30
Tutorial
1
2
.
(5)
b
Memo:
The color, sewing attributes and size can also
be changed after the shape is drawn.
(6) While holding down the
the pointer in the Design Page, as shown
in the illustration.
b
Memo:
To draw the shape while maintaining its
height-to-width proportion, hold down the
Shift key while dragging the pointer.
(7) Place the pointer over the leaf so that the
shape of the pointer changes to
then drag the leaf to the desired position.
Step 2 Duplicating, flipping and
moving shapes
Now, we will duplicate the leaf on the right side, flip
it horizontally, and then move it to the left side of the
stem.
1
Duplicate the leaf on the right.
(1) Right-click the leaf.
(2) Click Duplicate.
key, drag
Shift
, and