Brother PE-Design 8.0 Instruction Manual page 110

Arranging Embroidery Designs (Layout & Editing)
Stippling stitch
Run pitch
Spacing
Use Motif
Type and size of the
motif stitch patterns
H-Arrange
V-Arrange
Spacing
Run pitch
Manual punch
If Satin Stitch, Fill Stitch or Prog. Fill Stitch is selected as the region sew type for the manual punching pattern,
feathered edge settings can be specified.
Feathered edge settings not specified
Feathered
edge
Select a pattern for the feathered edge.
Click to display the Browse dialog box. Select the desired
pattern from the list of patterns that appears.
108
Specify the run pitch (length of one stitch).
This cannot be specified if the motif stitch is
used.
Specify the spacing between adjacent
stitches.
To use a motif stitch in the pattern, select the check box, and then specify settings for the
following attributes.
c
"Motif stitch" in the "Line sewing attributes" on page 99.
Specify the edge of the stitching
where the feathered edge is to be
applied.
When the check box is selected, a
feathered edge is applied to the
embroidery pattern in the Design
Page. Check the preview, and
then select the edge where the
feathered edge is to be applied.
Specify the width of the feathered edge
Short
The turns are
smoother.
Narrow
The pattern is finer.
Feathered edge settings specified
Top side of pattern
For <pattern11>
Bottom side of
pattern
For <pattern18>
Short
Long
The turns are more
angled.
Wide
The pattern is coarser.
Top edge only
Bottom edge only
Top and bottom
edges
Long