Brother PE-Design 8.0 Instruction Manual page 12

Design Center
● An eraser tool has been added to the Tool Box in the Line Image Stage.
● The maximum setting for Thinning Process when converting a line image to a figure handle image has
been increased. This allows thicker figure handle lines to be created.
Font Creator
● A TrueType font character can be opened as a template. In addition, a custom font can be created
automatically from a TrueType font.
● Characters other than letters of the alphabet, numbers and symbols can be registered.
● If a template image was open when custom font data is saved in PEF file, the template image will be
saved with the data.
■
General
● New sample embroidery files have been added to the Design Library.
● The estimated sewing time has been added to the design properties.
● Embroidery hoop sizes 200 × 200 mm(7.3/4 × 7.3/4 inches) and 200 × 300 mm(7.3/4 × 11.3/4 inches)
have been added to the Design Page Property dialog box.
● File formats have been added to those available for images that can be opened as templates or original
images.
- GIF(.gif) format is supported.
- LZW-compressed .tif is also supported.
10