Brother PE-Design 8.0 Instruction Manual page 149

Step 2 Line Image Stage
In Line Image Stage, lines can be easily edited.
Lines can be drawn freehand with pen tools and can
easily be erased with the eraser tool.
1
To erase a line, right-click with a Pen tool
selected, or hold down the right mouse button
and drag the pointer.
Lines can also be erased with
2
To draw lines, click a Pen tool.
Select the Pen tool with the desired thickness
of the line to be drawn.
Drag the pointer to draw a line.
b
Memo:
To draw vertical or horizontal lines, hold down
the Shift key while moving the pointer.
b
Memo:
• If lines are drawn or erased incorrectly, click
Edit, then Undo, or click
to undo the last operation.
• To change the display size, click
or .
Basic Design Center Operations
.
(Undo button)
,
3
When the line image is finished, click
click Stage, then To Figure Handle.
4
Click OK.
c
For details on other settings in the Figure
Object Conversion Setting dialog box,
refer to "Changing settings for converting
to outlines" on page 158.
→ The line image is converted to a figure
handle image.
b
Memo:
Even after the line image is converted to a
figure handle image, you can return to the
Line Image Stage to edit the line image.
, or
147