Telephone Operation - Binatone Reliant 510 User Manual

5. Telephone Operation

Ringer volume
RINGER
RINGER
To make a
1
call
2
1
2
To answer a
call
To adjust the
speakerphone
volume
Binatone Help Line - 0845 345 9677
The Ringer High-Low switch located at the
back of the Base unit allows you to adjust the
volume of the ringer.
- High volume
- Low volume
Lift the handset or press the SPEAKERPHONE
button on the Base unit.
Check for dial tone.
Dial the telephone number.
The display shows the duration of the call in
minutes and seconds.
OR Using Pre-dialling:
Dial the telephone number.
If you make a mistake you can correct it by using
the DEL button to delete digits and then adding the
right ones.
Lift the Handset or press the SPEAKERPHONE
button on the Base unit to dial out the number.
When the phone rings;
Lift the handset or press the SPEAKERPHONE
button on the Base unit.
The display shows the duration of the call in
minutes and seconds.
During a call;
Adjust the volume of the speakerphone to your
comfortable volume level using the SPEAKERPHONE
volume slider located on the right side of the Base
unit.
Calls are charged at Local Call rate.
12