Advertisement
INSTALLATION
OPERATION
1. Function setting:
On-hook mode, Press and hold SET key to enter menu setting, the phone LCD will display SET 1 DATE,
press UP or DOWN key to select different options. Press SET key again to confirm. Use UP or DOWN key to
select the mode you need. After completing the setting, press SET key to go to the next item. To exit menu,
press DEL key.
By pressing SET key (on-hook mode), you can select the following:
SET ITEM
DATE/TIME
LCD panel displays SET 1 DATE, press SET key to enter this mode.
The year value would flash, use UP or DOWN key to select value, then
press SET key to move to next item.
CODE
LCD panel display SET 2 CODE, press SET key to confirm, LCD display
CODE, press SET key to enter this mode. Use UP or DOWN key to
select value, then press SET key to move to next item.
Area Code is used to filter the number for incoming calls. E.g. Area code
= 75 when there's incoming call with 75 29980622 it will be displayed as
29980622 only.
PABX CODE
LCD panel display SET 3 PCODE, press SET key to enter this mode.
LCD displays PCODE, use UP or DOWN key to select value, then press
SET key to confirm.
To activate this feature, while on-hook, dial the number then press
BACK. When the first number matches the PCODE, the telephone will
dial the first number followed by a pause then continue with the rest of
the number.
ALARM
LCD display SET 4 Alert, press SET key to enter this mode. LCD
display 00-00 OFF means this function is off. Use UP or DOWN key set
time and select ON or OFF.
The telephone will ring once the alarm time is reached and make sure
2. On hook function operation
2.1 Incoming Call Receive
When received FSK/DTMF incoming calls, the LCD displays the calling numbers, date and real-time. And
records its order. If it is FSK mode, it will refurbish the month, the date and the real-time setting, remain the
year setting. If it is DTMF mode, it won't alter any setting, when the system receives DTMF mode incoming
calls it will put the date and time to the new calls because the DTMF signal only owns incoming numbers,
which is without incoming date and time signals. If it is a new call, it will display "NEW", if it is a repeat call, it
will display"REP".
OPERATIONS
Advertisement
