Telephone Operation; Ringer Volume - Binatone Caprice 670 User Manual

All manuals and user guides at all-guides.com
Setting up continue...
8 Press UP or DOWN button to set the third
Calls
digit of the REMOTE ACCESS code.
9 Press MENU/OK button to confirm the REMOTE
MENU/OK
ACCESS setting.
10 Press
Stop
Two different compression rates (ON and OFF) are
TAM HD:
provided for you to select the recording quality /
ON/OFF setting
total recording time of incoming messages.
With the compression rate set to ON the recording
quality will be higher, but it will only save up to 8
minutes of messages.
With the compression rate set to OFF the
recording quality will be lower, but it will only
save up to 20 minutes of messages.
1 Press Menu/OK button.
MENU/OK
Calls
2 Press UP or DOWN button until display shows
TAMHD:ON (or OFF).
Press Menu/OK button to confirm.
3
MENU/OK
Calls
4 Press UP or DOWN button to select ON or OFF.
5
Press Menu/OK button to confirm the TAM HD
MENU/OK
setting.

5. Telephone Operation

The Ringer High-Low switch located at the back of the

Ringer volume

Base unit allows you to adjust the volume of the ringer.
- High volume
- Low volume
Lift the handset or press the HANDSFREE
To make a
button on the Base unit.
1
Handsfree
call
2 Dial the telephone number.
minutes and seconds.
Using the Pre-dial mode
Binatone Help Line - 0845 345 9677
/STOP button to return to standby mode.
The display shows OPTIONS MENU OPTIONS MENU OPTIONS MENU OPTIONS MENU
OPTIONS MENU
The ON (or OFF) will be blinking.
Check for dial tone.
The display shows the duration of the call in
Calls are charged at Local Call rate.
11
.