Operational Notes - Binatone Reliant 510 User Manual

11. Operational notes

Electrical safety
DON'T let the Base unit get wet. Electrical equipment can cause serious
injury if used while you are wet or standing in water.
If the Base unit ever falls into water, DON'T retrieve it until you have
unplugged the power lead from the mains and the telephone line plug
from the telephone socket; then pull it out by the unplugged cables.
NEVER use your Reliant 510 outdoors during a thunderstorm -
unplug the Base unit from the telephone line and the mains socket when
there are storms in your area. Damage caused by lightning is not
covered by the guarantee.
Locating the Base unit
The Base unit should be placed on a level surface, in a position where:
the mains adapter plug will reach an easily accessible 230-V AC switch
mains supply socket - never try to lengthen the mains power cable.
the telephone line cable will reach your telephone line socket or extension
socket.
it is not close to a sink, bath or shower, or anywhere else where it might
get wet.
it is not close to other electrical equipment - fridges, washing machines,
microwave ovens, TVs, fluorescent lights, etc.
Cleaning and care
Don't clean any part of your
other solvent chemicals - this may cause permanent damage which is
not covered by the Guarantee. When necessary, clean it with a damp
cloth.
Keep your Reliant 510 away from
sunlight, and don't let it get wet.
Every effort has been made to ensure high standards of reliability for
your Reliant 510. However, if something
try to repair it yourself - consult your supplier or the Binatone Help
Line.
Binatone Help Line - 0845 345 9677
Reliant 510 with benzene, thinners or
hot, humid conditions or strong
does go wrong, please
Calls are charged at Local Call rate.
31
do not