Subwoofer On And Off; Sound (Beep) Guide Function; Scroll Setting - Alpine DVA-7996R Owner's Manual

SETUP Operation
Rotary encoder/MODE
SOURCE
BAND
SETUP
DN UP

Subwoofer On and Off

1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or
W (Subwoofer)" mode.
3
Press the BAND button to toggle mode between
SUB-W ON or LINK and SUB-W OFF.
SUB-W ON: The subwoofer output is set to ON
regardless of whether the rear DVD function (page 40)
is set to ON or OFF.
SUB-W LINK: The subwoofer output is set to ON when
the rear DVD function (page 40) is set to OFF.
The subwoofer output is set to OFF when the rear DVD
function (page 40) is set to ON.
SUB-W OFF: The subwoofer output is set to OFF
regardless of whether the rear DVD function (page 40)
is set to ON or OFF.
4
Press the SETUP button after setting the SUB-W ON
or LINK.
5
Press the MODE button repeatedly to select the
SUB-W (Subwoofer) mode.
SUB-W
VOLUME
Press the DN or
SUB-W mode, and the subwoofer output phase is
toggled SUBW NOR (0°) or SUBW REV (180°).
6
Turn Rotary encoder until the desired sound is
obtained in each mode.
NOTES
• Initial mode is "Subwoofer ON."
• Set to "Subwoofer OFF" unless the subwoofer is used.
• The SUB-W LINK cannot be selected when our company's
external processor is connected.
• It is not possible to adjust the subwoofer output level when
"SUB-W LINK" is selected and the rear DVD function is
turned on.
• Any subwoofer adjustment (level or phase) made while the
rear DVD function is turned on, is stored in memory. The
settings stored are recalled the next time the rear DVD
function is turned on (only when our company's external
processor is disconnected.).
16
-EN
UP button to select the "SUB-
BALANCE
DEFEAT FADER
UP button after selecting the

Sound (Beep) Guide Function

This function will give audible feedback with varying
tones depending upon the button pressed.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or
3
Press the BAND button to toggle the mode between
BEEP ON and BEEP OFF.
NOTE
The initial setting at the factory is BEEP ON.
4
Press the SETUP button to set the selected mode.

Scroll Setting

This CD player can scroll the disc and track names
recorded on CD-TEXT discs, as well as the text
information of MP3 files, folder names, and ID3 tags.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or
(SCROLL)."
3
Press the BAND button to toggle the mode between
SCR AUTO and SCR MANUAL.
• SCR AUTO: the CD text information, the text
information of folder and file names, and the ID3
tags are scrolled automatically.
• SCR MANUAL: the display is scrolled only when a disc
is loaded or when a track is changed, etc.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
NOTES
• Initial mode is "SCR MANUAL."
• The unit scrolls CD text names, folder names, file names or
ID3 tag display. The disc titles input manually (refer to page
14) cannot be scrolled.
UP button to select "BEEP."
UP button to select "SCR