Auxiliary Features; Specifications; Setting The Dual Watch Mode - Binatone Terrain 750 User Manual

5. Setting the Dual Watch Mode

Your Terrain 750 is capable of monitoring two channels, the current and
another (dual watch) channel. If the unit detects a signal on either
channel, it will stop and receive the signal.
a. Press the MENU button 11 times , the " DCM " icon will
be displayed while "OF" flashes on the LCD Screen.
b. Press the UP or DOWN button to select the Dual Watch
channel (1-8, except the current channel).
c. Press the MENU button to change the CTCSS code.
d. Press the UP or DOWN button to select the desired
CTCSS code (1-38)
e. Press the MENU button to change the DCS code.
f. Press the UP or DOWN button to select the desired
DCS code (1-83).
g. Press the
6. AuxiliaryFeatures
6.1 KeyLock
The Key Lock feature allows the user to disable the UP,
DOWN and MENU buttons so that the Terrain 750 settings
can not be changed accidentally.
a. To activate the Key Lock feature, press and hold the
MENU button until key lock "
the LCD Screen.
b. To deactivate the key Lock feature, press and hold the
MENU button until key lock "
form the LCD Screen.
The PTT, and CALL buttons will remain functional even if the
Key Lock feature is activated.
6.2 Stop watch function
a. In Standby Mode, press and hold the
seconds. The Stop watch icon appears in the LCD screen.
b. Press the
To stop, pr e ss the
c. Press the
d. Press and hold the
to exit from the stopwatch mode.
6.3 LCD Screen Back Light
Every time a button is pressed (except PTT and
CALL buttons), the LCD Screen back light will illuminate
for 5 seconds.
6.4 Microphone/Earphone/Charge Jack
The Terrain 750 is equipped with an auxiliary microphone,
earphone, and charge jack located at the opposite side to
the PTT button.
It requires a microphone/earphone with a 2.5mm,3-pole jack
connector, and this is not supplied with your Terrain 750.

7. Specifications

Channels Available
Main
Channel
CTCSS Sub-channel
Digital Code channal
Output Power (TX)
Ran g e
There are 38 CTCSS sub codes and 83 DCS codes available.
Therefore,you can have:
1. Combination of 8 mains channel and 38 CTCSS sub codes – 304 combinations.
2. Combination of 8 mains channel and 83 DCS sub codes – 664 combinations.
PTT button to confirm your setting.
button once to start the Stop watch.
UP
button again.
UP
DOWN button once to reset the timer.
button for 3 seconds
CALL
"icon appears on
" icon disappears
button for 3
CALL
Combinations
968 Channels
8 Channels
38 for each Channel
83 for each Channel
0.5 W
U p to 8 Kms.