Binatone Terrain 750 User Manual

Binatone Terrain 750 User Manual

Private mobile radio with twin charger

Advertisement

Antenna
Antenna

LCD Screen

LCD Screen
- Displays the
- Displays the
current channel
current channel
selection and other
selection and other
radio symbols.
radio symbols.
PTT (PUSH to
PTT (PUSH to
TALK) button -
TALK) button -
to transmit.
MENU Button
- Press to change
sub-channels,
modes.
CALL button
CALL button
- Press to send
- Press to send
ringing tone to other
ringing tone to other
PMR units.
PMR units.
Speaker
Speaker
1. LCD Screen
Displayed when the Stop watch function is activated.
Displayed when transmitting a signal.
Displayed when receiving a signal.
CTCSS
Displayed when a CTCSS sub-channel is turned ON.
DCS
Displayed when the Digital Code System is turned ON.
Displayed when the Dual Watch function is turned ON.
Displayed when the VOX feature is enabled.
Displays when the PMR is scanning all channels.
Displayed when the Key Lock feature is activated.
Displays the current Speaker volume level.
Terrain750
Private mobile radio with twin charger
Channel Number. Changes from 1 to
8 as selected by the user.
CTCSS Code. Changes from 1 to 38
as selected by the user.
Digital Code. Changes from 1 to 83
as selected by the user.
Displays the Battery charge level.
When the bars are reduced, the
battery needs recharging.
USER GUIDE
Ear/Mic/Charge
Jack
(POWER)
button - Press and
hold to turn the unit
ON or OFF.
MIC (Microphone)
buttons - Press to
change channels,
volume, and to select
settings during
programming.

Advertisement

Table of Contents
loading

Summary of Contents for Binatone Terrain 750

  • Page 1: Product View

    Terrain750 Private mobile radio with twin charger USER GUIDE Antenna Antenna LCD Screen LCD Screen - Displays the - Displays the current channel current channel selection and other selection and other radio symbols. radio symbols. PTT (PUSH to PTT (PUSH to TALK) button - Ear/Mic/Charge TALK) button -...
  • Page 2: Installation

    2. Installation Belt Clip latch 2.1 Removing the Belt Clip a. Pull the Belt Clip latch forward (away from the PMR.) While pulling the Belt Clip latch, push up the Belt Clip as shown in Figure 1. 2.2 Installing the Belt Clip a.
  • Page 3: Operation

    of the 9.0V DC/300mA es s . When the battery level reaches its minimum level in PMR on mode, the unit will emit two beep tones and turn off. proceeds to watch mode. The Terrain 750 has a built in power saver feature to make the tatteries OFF to conserve battery power.
  • Page 4 3.2 Turning the Unit ON/OFF To Turn ON; POWER Press and hold the button until the LCD Screen turns ON and displays the current channel. To switch OFF; Press and hold the POWER button until the LCD screen turns blank. You will hear a beep tone each time to confirm.
  • Page 5 Press the PTT button to confirm your setting. “VOX” will steadily appear on the LCD Screen as long as the VOX feature is activated. VOX operation is not recommended if the Terrain 750 will be used in a noisy or windy environment. Binatone Help Line - 0845 345 9677...
  • Page 6: Call Ringtone

    Press the MENU button 10 times, "t0" is displayed with "On" flashing on the LCD Screen. b. Press the UP or DOWN button to select the Key tone on (On) or off (OF). c. Press the PTT button to confirm your setting. Binatone Help Line - 0845 345 9677...
  • Page 7: Auxiliary Features

    5. Setting the Dual Watch Mode Your Terrain 750 is capable of monitoring two channels, the current and another (dual watch) channel. If the unit detects a signal on either channel, it will stop and receive the signal. a. Press the MENU button 11 times , the “ DCM ” icon will be displayed while "OF"...
  • Page 8: Channel Frequency Table

    8. Cleaning and Care To clean your PMR, use a soft cloth dampened with water. Do not use cleaners or solvent, which may cause damage that may not be covered by guarantee. Binatone Help Line - 0845 345 9677...
  • Page 9: Guarantee And Service

    * This does not affect your statutory rights. This does not affect your statutory rights. Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without prior notice.
  • Page 10: Troubleshooting Guide

    Transmitting and Receiving PMR units should be tuned to the communication same Channel and CTCSS or DCS code (if applicable). BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.u...

Table of Contents