Other Handset Features; Turning Key Tones On And Off; Auto-Power-Off (Apo); Using The Handset As A Stopwatch (Timer) - Binatone MR600 Twin User Manual

Other handset features

Turning key tones on and off

Normally, you will hear a tone each time you press a button on
your MR600 handset. If you prefer, you can turn these tones off,
as follows:
1 Switch the handset off by pressing
2 While holding down
back on
As long as key tones are turned off,

Auto-Power-Off (APO)

This feature saves battery life by automatically turning the handset
off if you have not pressed any button for a set time. You can set
the timeout to 1, 2 or 3 hours; or set it to 0 (zero) to turn APO off.
1 Press seven times
flashes on the display, which shows the current timeout
setting.
L M
change the timeout setting (1, 2 or 3, or
2 Press or
0 for APO off)
3 Press briefly
is shown on the display as long as APO is turned on.
12
, press again to switch
is shown on the display.

Using the handset as a stopwatch (Timer)

To turn the Timer function on:
1 Press six times
TIMER appears on the display, which also shows
and 00.00.0 (lapsed time, in minutes, seconds and tenths of
seconds)
L
2 Press to turn Timer on or
3 Press briefly
As long as the Timer function is on, TIMER and the lapsed time are
shown on the display.
To start the stopwatch:
◗
Press CALL/START
The lapsed time is shown on the display.
To stop the stopwatch:
◗
Press LOCK/STOP
To reset the stopwatch to zero (00.00.0):
◗
Press LOCK/STOP again while the stopwatch is stopped
To suppress the lapsed time display:
◗
Press CALL/START while the stopwatch is running
The lapsed time will stay unchanged on the display, while TIMER
flashes.
To see the updated lapsed time:
◗
Just press CALL/START again
Binatone Help Line — 01325 304 473
Other handset features, continued
M
to turn Timer off
13