Thermostat; Language; Preheating Alarm Light; Beeper Volume - LG LSE3092ST Owner's Manual

14
FEATURES

THERMOSTAT

You may find that your new oven cooks differently than
the one it replaced. Use your new oven for a few weeks
to become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, and you still think that it is too hot or too
cold, you can adjust the thermostat yourself.
Setting the thermostat
1. Touch and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Touch the WARM/PROOF button once and "Adj" will
appear in the display.
3. Using the number buttons, enter the temperature
you wish to adjust.
For example, to adjust the oven temperature
15 degrees, touch 1 and 5.
4. Touch WARM/PROOF once to increase (+) or twice
to decrease (-) the temperature.
5. Touch the START button to accept the change.
NOTE
• This adjustment will not affect the broiling or
Self Clean temperatures. The adjustment will be
retained in memory after a power failure. The oven
temperature can be increased (+) or decreased (-)
as much as 35°F or 19°C.
• Once the temperature is increased or decreased,
the display will show the adjusted temperature
until it readjusts.

LANGUAGE

The default language of the display is English. It can be
changed to Spanish or French.
1. Touch and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Touch the WARM/PROOF button 2 times and "Lng"
appear in the display.
3. Touch the 1 button for English, touch the 2 button
for Spanish, touch the 3 button for French.
4. Touch the START button to accept the change.

PREHEATING ALARM LIGHT

When the oven reaches its set temperature the preheating
alarm light will flash until the oven door is opened.
You can activate or deactivate the preheating alarm light.
1. Touch and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Touch the WARM/PROOF button 3 times and "PrE"
appear in the display.
3. Touch the 1 button for ON or touch the 2 button for
OFF.
4. Touch the START button to accept the change.

BEEPER VOLUME

1. Touch and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Touch the WARM/PROOF button 4 times and "BEEP"
will appear in the display.
3. Touch the 1 button for LOUD, touch the 2 button for
NORMAL, touch the 3 button for LOW, and touch the
4 button for MUTE.
4. Touch the START button to accept the change.
FAHRENHEIT OR CELSIUS
The oven temperature settings can either be set to
Fahrenheit or Celsius. The oven defaults to Fahrenheit
unless changed by the user.
1. Touch and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Touch the WARM/PROOF button 5 times and "UNIT"
will appear in the display.
3. Touch the 1 button for F (Fahrenheit) or touch the 2
button for C (Celsius).
4. Touch the START button to accept the change.

OVEN LIGHT

The interior oven light automatically turns ON when the
door is opened. The oven light may also be manually
turned ON or OFF by touching the OVEN LIGHT button.
NOTE
The oven light cannot be turned on if the Self Clean
function is active.