Timer On/Off; Settings (Hour Mode, Convection Auto Conversion, Oven Thermostat, Preheat Alarm Light, Beeper Volume, Fahrenheit Or Celsius, Cooktop On Alert Volume) - LG LSEL6332 Series Owner's Manual

20 OPERATION
NOTE
• The oven light turns off automatically after 90
seconds.

Timer On/Off

The Timer serves as an extra timer in the kitchen
that beeps when the set time has run out. It does
not start or stop cooking.
The Timer feature can be used during any of the
other oven control functions.
1
Press Timer On/Off once to set hours:
minutes. The display shows 0:00 with HR
letters inside and Timer flashes. Press Timer
On/Off twice to set minutes:seconds.
2
Press plus(+) or minus(-) to select the desired
time.
3
Press Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
• If Timer On/Off is not pressed, the timer returns
to the time of day.
4
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
Canceling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.
Settings (Hour Mode, Convection
Auto Conversion, Oven Thermostat,
Preheat Alarm Light, Beeper
Volume, Fahrenheit or Celsius,
Cooktop On Alert Volume)
Press and hold Clock for 3 seconds. Then press the
Clock button repeatedly to toggle through and
change oven settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven thermostat
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
• set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1
Press and hold Clock for 3 seconds.
2
Press +/- to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉ (175 ℃), and 325 ℉ (160 ℃) shows on the
display after preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1
Press and hold Clock for 3 seconds. Then
press the Clock button repeatedly until Auto
appears in the display.
2
Press plus(+) or minus(-) to enable or disable
the feature.
3
Press START to accept the change.