Pc Settings - Picture Position, Clock Phase, Sampling Clock, Reset; Clock Phase - Toshiba 46WM48 - 46" Rear Projection TV Owner's Manual

PC settings – picture position, clock phase,
Picture position
The picture position may be adjusted to suit personal
preference.
to select PC, then select PC Setting
Press
B
1
from the SET UP menu.
SET UP
Language
Country
PC Setting
AV Connection
MENU Back EXIT Watch TV
Press OK. Press P and Q to select an option,
2
then S or R to adjust the settings.
Horizontal position
Horizontal width
Vertical position
Vertical height

Clock phase

MENU Back EXIT Watch TV
Clock phase
The Clock phase matches the PC signal with the television
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press Q until PC Setting is
1
highlighted.
Press OK to select, then Q to highlight
2
Clock phase.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
MENU Back EXIT Watch TV
3 Use S or R to adjust until the picture clears.
sampling clock, reset
English
England
OK
OK
PC Setting
0
0
0
0
0
PC Setting
0
0
0
0
0
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press Q until PC Setting is
1
highlighted.
Press OK to select, then Q to highlight
2
Sampling clock.
Vertical position
Vertical height
Clock phase
Sampling clock
Reset
MENU Back
Use S or R to adjust until the picture clears.
3
To return to the original factory settings.
In the SET UP menu press Q until PC Setting is
1
highlighted.
Press OK to select, then Q to highlight Reset.
2
Vertical position
Vertical height
Clock phase
Sampling clock
Reset
MENU Back
Press OK.
3
17
Sampling clock
PC Setting
0
0
0
0
EXIT Watch TV
Reset
PC Setting
0
0
0
0
EXIT Watch TV
OK
OK