Using The Pc Settings Feature; Mx196 (E/F) Web 213:276 - Toshiba 62MX196 User Manual

MX196_EN.book Page 53 Tuesday, June 27, 2006 1:43 PM

Using the PC settings feature

You can view the image from a PC on the TV screen. The PC
must be connected to the TV's PC IN terminals
(- Installation Guide).
The PC Settings feature allows you to make any necessary
adjustments to the image.
If the edges of the image are not visible, you can adjust the
Horizontal Position/Width and Vertical Position/
Height.
If the picture is affected by interference, you can adjust the
Clock Phase and Sampling Clock.
To adjust the PC settings:
Repeatedly press + to select PC input mode
1
(- "Selecting the video input source to view" page 32).
Press Y and open the Setup menu.
2
Highlight PC Settings and press T.
3
Note: If a PC is not connected, this feature will be grayed
out in the Setup menu.
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
ColorStream HD1 Audio
HDMI 1 Audio
ColorStream HD2 Audio
Navigate ENTER
4
Press B or b to highlight the item you want to adjust.
5
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position
Horizontal Width
Vertical Position
Vertical Height
Clock Phase
Sampling Clock
Reset
Note: The screen is disrupted momentarily when adjusting the
PC settings. This is not a sign of malfunction.
Chapter 5: Using the TV's features
No
Auto
No
Select CH RTN Back EXIT Exit
0
0
0
0
0
0
Done
Horizontal Position:
•
Moves the picture left/right.
The adjustment range is within ±5 from center.*
Vertical Position:
•
Moves the picture up/down.
The adjustment range is within ±5 from center.*
Horizontal Width:
•
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
Vertical Height:
•
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
Clock Phase:
•
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±2 from center.*
Sampling Clock:
•
Helps to redure noise and minimize periodic vertical stripes
on the screen.
The adjustment range is within ±15 from center.*
* The range of adjustment may vary slightly.
53

MX196 (E/F) Web 213:276