Specifying Different Startup Images For The Active And The Standby Rsps - Cisco RSP2 - Route Switch Processor 2 Installation And Configuration Manual

slot9: MIP, hw 1.0, sw 20.02, ccb 5800FFC0, cmdq 480000C8, vps 8192
slot
slot11: FSIP, hw 1.1, sw 20.01, ccb 5800FFE0, cmdq 480000D8, vps 8192
Router# dir slot0:pond/bath/rsp_fsip20-1
-#- -length- -----date/time------ name
3
Router# dir slaveslot0:pond/bath/rsp_fsip20-1
No such file
4079832 bytes available (3915560 bytes used)
Router# copy slot0:pond/bath/rsp_fsip20-1 slaveslot0:
4079704 bytes available on device slaveslot0, proceed? [confirm]
Router# dir slaveslot0:pond/bath/rsp_fsip20-1
-#- -length- -----date/time------ name
3
4069460 bytes available (3925932 bytes used)
Router#

Specifying Different Startup Images for the Active and the Standby RSPs

For software error protection, the RSPs should have different system images.
When the factory sends you a new router with two RSP2s, you receive the same system image on both
RSPs. To configure the HSA feature for software error protection, you need two separate software
images on the RSPs. You copy a desired image to the active RSP card and modify the boot system
commands to reflect booting two separate system images. Each RSP uses its own image to boot the router
when it becomes the active.
30
ATM4/0, applique is SONET (155Mbps)
gfreeq 48000150, lfreeq 480001D0 (4544 bytes), throttled 0
rxlo 4, rxhi 165, rxcurr 0, maxrxcurr 0
txq 480001D8, txacc 480000BA (value 0), txlimit 95
software loaded from system
T1 9/0, applique is Channelized T1
gfreeq 48000138, lfreeq 480001E0 (1536 bytes), throttled 0
rxlo 4, rxhi 42, rxcurr 0, maxrxcurr 0
txq 480001E8, txacc 480000C2 (value 27), txlimit 27
.......
10: TRIP, hw 1.1, sw 20.00, ccb 5800FFD0, cmdq 480000D0, vps 4096
software loaded from system
TokenRing10/0, addr 0000.0ca3.cd40 (bia 0000.0ca3.cd40)
gfreeq 48000150, lfreeq 48000200 (4544 bytes), throttled 0
rxlo 4, rxhi 165, rxcurr 1, maxrxcurr 1
txq 48000208, txacc 480000D2 (value 95), txlimit 95
.........
software loaded from flash slot0:pond/bath/rsp_fsip20-1
Serial11/0, applique is Universal (cable unattached)
gfreeq 48000138, lfreeq 48000240 (1536 bytes), throttled 0
rxlo 4, rxhi 42, rxcurr 0, maxrxcurr 0
txq 48000248, txacc 480000F2 (value 5), txlimit 27
...........
10242 Jan 01 1999 03:46:31 pond/bath/rsp_fsip20-1
10242 Mar 01 1999 02:35:04 pond/bath/rsp_fsip20-1
OL-4923-01 B0