Image Quality - Xerox 750DP - Phaser Color Laser Printer Manual

Expectations Setting:
Xerox DocuColor 5750 Digital Color Printer / Copier
2 SIDED COPYING / PRINTING
2 SIDED COPYING / PRINTING
- The 5750 is enabled for manual duplex via the
Bypass Tray.
- As with any full color copier, duplex performance is
not expected to match the performance of single
sided copying. Paper jam rates will be higher than
the rate you will experience in single sided mode.
Extensive duplex operation may have a secondary
effect on performance and copy quality of single
sided jobs.
- The 5750 should provide reasonable duplex
performance when operated within the specified
paper weight range of 24# (90 gsm) - 28# Bond (105
gsm) and utilizing the recommended procedure
outlined in the MUG.
- Duplexing applications should not be used with
coated papers.
- The 5750 will not be replaced free of charge for
unsatisfactory duplex performance because a
replacement unit will have similar performance.
INSERTIONS OF COPIES INTO HIGH
INSERTIONS OF COPIES INTO HIGH
- 5750 copies can be used as inserts in 5090/5390/
DocuTech 135.
- Do not use 5750 inserts in 5100 due to
incompatibility with the fuser.
Page: 4
VOLUME COPIERS
VOLUME COPIERS

IMAGE QUALITY

IMAGE QUALITY
- Color Quality judgment is subjective and could be
impacted by lighting.
- Like any color reproduction process there will be
some variances in color quality over time.
- Image Quality is strongly influenced by paper.
- The image quality for heavy weight paper such as
90# (163 gsm) and 110# Index (203 gsm) may not be
comparable to lower weight thruput materials.
- Key Applications may be copied/printed on the 5750
and reviewed by the customer.
Launch Version
March 1997