Light Rheostat; Inertial Fuel Cut-Off Switch On Display; Partial Lighting - Alfa Romeo GT Owner's Manual

LIGHT RHEOSTAT (fig. 79-80)
This function makes it possible to adjust
the lighting (dimming/increasing) of the in-
strument cluster, odometer display (total
and trip meter, headlamp aiming device dis-
play) of the clock/outside temperature dis-
play and of the radio display.
To access the light rheostat, open the
menu by pressing button MODE, select
"ILLU" (first option displayed) by pressing
again button MODE and then set the re-
quired level using buttons ▲/▼.
"ILLU" function is available when at least
the side/taillights are on.

Partial lighting

Keeping button ▼ pressed (on the plate
at the side of the steering column) for more
than 4 seconds the instrument cluster light-
buzzer deactivated display (
60
fig. 78
ing is turned off with the exception of the
speedometer.
Keeping button ▲ pressed (on the plate
at the side of the steering column) for more
than 4 seconds the complete instrument
cluster lighting is turned on again.
display
with minimum brightness
fig. 79
display
) with maximum brightness
OFF
A0A0014b
fig. 80
INERTIAL FUEL CUT-OFF
SWITCH ON DISPLAY (fig. 81)
The display shown appears automatically
when the inertial fuel cut-off switch cuts in,
following a crash of a certain magnitude.
The switch shuts off the supply of fuel.
IMPORTANT See the description in the
Controls paragraph under the Inertial fuel
A0A0012b
cut-off switch.
inertial fuel cut-off switch
on display
A0A0013b
fig. 81
A0A0007b