The Automatic Two-Zone Climate Control System - Alfa Romeo GT Owner's Manual

HOW TO USE
THE AUTOMATIC TWO-ZONE
CLIMATE CONTROL SYSTEM
(fig. 97)
IMPORTANT The knob rings do not
have a mechanical stopper therefore, once
the maximum or minimum value has been
reached, they are free to turn in both
directions.
The system can be started in different
ways, but it is advisable to set the tem-
peratures required on the displays; then
press the (13) button.
AUTO
This way the system will start working
completely automatically to reach the
temperatures set as quickly as possible
and then maintain them.
During completely automatic system
operation, the temperatures set can be
changed at any time; the system will auto-
matically change its settings to adjust to
the new requirements.
IMPORTANT To be able to be accepted
by the system, the difference in the tem-
perature between the driver's and passen-
ger's side must be within a range of 7°C.
It is possible to personalise the choices
made automatically by the system inter-
veningmanually on the following controls:
- fan speed adjustment knob (4)
- air distribution selection buttons (10)
- inside air re-circulation on/off button
(8) v
- climate control on enable button (14)
√
.
Manually selecting one or more of these
functions turns off the right led on the but-
ton (13) .
AUTO
With one or more functions engaged
manually, the adjustment of the tempera-
ture of the air admitted to the passenger
compartment continues to be controlled
automatically by the system (left led on
button 13 on) except with the cli-
AUTO
mate control compressor off.
In fact, in this condition the air admitted
to the passenger compartment cannot
have a lower temperature than the out-
side air; this condition is indicated by the
turning off of the two leds on button (13)
and flashing on the display (1)
AUTO
and/or (5) related with the temperature
rate that cannot be obtained.
93