Alfa Romeo GT Owner's Manual page 190

– make sure the compressor switch A-
fig. 16 is set to 0 (off), start the engine
and fit plug A-fig. 17 into the cigar lighter
outlet and then turn on the compressor by
setting switch A-fig. 16 to I (on);
fig. 16
– inflate the tyre to the correct pressure
value. Check tyre pressure on gauge B-fig.
16 with compressor off to obtain precise
reading;
– if after 5 minutes it is still impossible
to reach at least 1.5 bar, disengage com-
pressor from valve and current outlet, then
move the car forth for approx. ten metres in
order to distribute the sealing fluid inside the
tyre evenly, then repeat the inflation oper-
ation;
A0A1100b
fig. 17
– if after this operation it is still impossi-
ble after 5 minutes to reach at least 1.8 bar,
do not start driving since the tyre is exces-
sively damaged and the quick tyre repair kit
cannot guarantee suitable sealing, contact
Alfa Romeo Authorized Services;
– once the correct tyre pressure has been
reached, start driving immediately;
Apply the sticker in a vis-
ible position for the driver
to indicate that the tyre
has been treated with the quick
tyre repair kit. Drive carefully es-
pecially when cornering. Do not ex-
ceed 80 km/h. Avoid heavy brak-
ing and accelerating.
A0A0647b
189