Table of Contents
Advertisement
Operation and Features
2
Testing Continuity
The continuity testing function has the following features:
• Uses a 1 mA ± 0.2% constant current source.
• Open circuit voltage is limited to less than 4.5 V for all
ranges.
• Continuity threshold is fixed at 10 Ω.
• Response time is 60 samples/second.
Make the connection as shown below.
Test
Current
Open or closed circuit
Agilent Measurement Manager operation
)
)
Select the Cont-
)
function. The reading is displayed and
updated continuously.
SCPI commands
The following example shows how to make a Continuity Test
measurement using SCPI commands.
MEASure:CONTinuity?
U2741A User's Guide
37
Advertisement
Table of Contents
