Manual 2-Sided Printing Using Tray 1 (Mpt) - Xerox 6250DP - Phaser Color Laser Printer Reference Manual

Manual 2-Sided Printing Using Tray 1 (MPT)

Printing Side 1
1.
Insert paper into Tray 1 (MPT). For more information, see the "Basic Printing" topic in
this section. Place the side to be printed facedown with the top of the page entering the
printer first. If using paper with pre-punched holes, place the holes toward the right side
of the tray when you are facing the front panel.
Caution
If you change the type of paper in a tray, you must change the paper type on the front
panel to match the paper that you loaded. If you fail to do this, print-quality
problems can occur and the fuser can be damaged.
2.
In the printer driver, select Tray 1 (MPT).
3.
Send the job to the printer so that the odd-numbered pages (side 1) are printed.
Printing Side 2
1.
Insert the printed paper with side 1 faceup, and the top of the page at the back of Tray 1
(MPT). If using paper with pre-punched holes, the holes toward the left side of the tray
when you are facing the front panel.
Phaser® 6250 Color Laser Printer
2-30
2-Sided Printing
6250-072
6250-056