Xerox 6200DX - Phaser Color Laser Printer Troubleshooting Manual page 15

The Calibrate Margins Menu
imaging area is shown as a dashed rectangle; the printer will not print outside this rectangle.
Step 1. Adjust Side 1 Margins. To move the dashed rectangle to the postion you want it on the page:
1. From the printer's front panel
2. Scroll to the Calibrate Margins Menu
page.
3. To move the dashed rectangle you see on the page printed to the position you want, use the front panel menu
items Adjust Side 1 "A" Margin
4. Reprint this page to verify the adjustment.
You can adjust the settings from -40 to +40 units. The thickness of the rectangle's dashed lines is 1 unit. 12 units move
the rectangle 1 mm. The maximum distance the rectangle can be moved (-40 to +40) is 6.7 mm.
A+
Phaser 6200 Color Printer
Calibrate Margins
Increase Adjust Side 1 "A"
Margin setting to move up.
Step 2. If the printer has the duplex option, adjust Side 2 Margins.
1. With Side 1 facing you, hold the print up to a strong light. Note the shadow of the solid lines printed on Side 2.
2. Use the front panel menu items
lines until they align with the Side 1 rectangle. Reprint to verify your adjustment.
Page 1 of 1
PHASER
allows you to adjust the printer's imaging area relative to the edges of the paper. The
Support Menu, scroll to
and press OK. Select
and Adjust Side 1 "B" Margin
Phaser 6200 Color Printer
Calibrate Margins
A-
Decrease Adjust Side 1 "A"
Margin setting to move down.
Adjust Side 2 "A" Margin
Phaser 6200
Cal
6200 COLOR PRINTER
®
Improve Print Quality? and press OK.
Print Calibrate Margins Page
as illustrated below.
Phaser 6200 Color Printer
Calibrate Margins
B-
Decrease Adjust Side 1 "B"
Margin setting to move left.
and Adjust Side 2 "B" Margin
A
B
-
A
-
Calibrate for Margins
and press OK to print this
Phaser 7700 Color Printer
Calibrate Margins
Increase Adjust Side 1 "B"
Margin setting to move right.
to move the Side 2 solid
Phaser 6200
Cal
B
B+