Emission Control System; Safety Rules - Ariens 920402 – Sno-Tek 24E Owner's/Operator's Manual

Hide thumbs Also See for 920402 – Sno-Tek 24E:
Table of Contents

Advertisement

1. WARNING!
Read Owner/Operator Manual.
OL1801
Keep people away from unit while
operating. Keep children out of
work area and under watchful care
of a responsible adult.
OL4370
Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
OL0910
Stop engine, remove key, read
manual before making any repairs
or adjustments.
OL4010
Wear appropriate hearing
protection.
OL4690
ONLY use clean-out tool to clear
blockages. NEVER use your
hands.
2. DANGER!
ROTATING PARTS! ONLY use
clean-out tool to clear blockages.
NEVER use your hands. High
speed impeller rotates below
discharge opening. Wait for all
moving parts to stop before
OS6610
removing clogs or servicing.
3. DANGER!
ROTATING PARTS.
Keep clear of auger while engine
is running.
OS2080

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.

SAFETY RULES

Read, understand, and follow all safety
practices in owner/operator manual before
beginning assembly or operating. Failure to
follow instructions could result in personal
injury and/or damage to unit.
ALWAYS remove key and/or wire from spark
plug before assembly, maintenance or
service. Unintentional engine start up can
cause death or serious injury.
Complete a walk around inspection of unit
and work area to understand:
• Work area • Your unit • All safety decals
ALWAYS check overhead and side
clearances carefully before operation.
ALWAYS be aware of traffic when operating
along streets or curbs.
GB - 5
Read Operator's Manual.
Allow operation only by
properly trained adult,
never children.
Stop engine and remove
ignition key prior to leaving
the operator's position for
any reason.
Keep all controls, guards
and safety devices properly
serviced and functional.
Never direct discharge
towards persons or
property that may be
injured or damaged by
thrown objects.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

920403Sno-tek 24eSno-tek 28e

Table of Contents