Instruction Set C - Neoware c50 - Thin Client User Manual

Instruction Set C

For example: If you possess units that are running 5.3.2 software,
the update must be a correctly configured update of that software
and X should be the contents of the 5.3.2 software system.rev file.
The 3000 directory must contain the correct update files, as
detailed under Instruction Set A.
If you do not possess any units running 5.3, 5.3.1, or 5.3.2 soft-
ware, the "X" value in the config.txt can have any value you want
(e.g. "test") and the 3000 subdirectory may remain empty.
1
Create a subdirectory in the "(ftproot)/Neoware" directory named
"CeNet."
2
Follow steps 1 through 5 under the Instruction Set A with two
changes:
A. Place all of the files and folders generated into the CeNet sub-
directory. Instead of neoware/3000, neoware/config.txt, neoware/
connections.rgy, and neoware/properties.rgy, the set up will
involve neoware/cenet/3000, neoware/cenet/config.txt", neoware/
cenet/connections.rgy, and neoware/cenet/properties.rgy.
B. Change the references in the config.txt file accordingly to
reflect the new directory structure. Instead of a config.txt in the
format:
SYSTEM "6.0.3 (Built on Feb 20 2002 at 21:06:07)" LOAD_AND_RUN /
PROPERTIES "November 20, 2002" UPDATE_REGISTRY /REBOOT
CONNECTIONS "November 22, 2002" UPDATE_REGISTRY Connec-
The new config.txt would have the format:
SYSTEM "6.0.3 (Built on Feb 20 2002 at 21:06:07)" LOAD_AND_RUN /
PROPERTIES "November 20, 2002" UPDATE_REGISTRY /REBOOT
CONNECTIONS "November 22, 2002" UPDATE_REGISTRY CeNet/
REBOOT install.exe 3000
Properties.rgy
tions.rgy
REBOOT install.exe CeNet/3000
CeNet/Properties.rgy
Connections.rgy
ezUpdate Server Configuration 89