Neoware c50 - Thin Client User Manual page 14

Asset Manager
Asset Manager
(Locate thin client
appliances)
Left-click
to select or
deselect an
address
Additional
addresses
Select the
number of
and delay
between SNMP
broadcasts.
Filter your broadcast
using the appliance
operating system.
FYI
In order to locate clients
on subnets through a
router or switch, you may
need to make changes in
the router/switch config-
uration: SNMP broad-
casts must be passed to
the subnet. For more
information, see "Appen-
dix A: Broadcast SNMP
and Router Configura-
tion" on page 79.
14 Building an asset database
select from the Actions dropdown menu.
Assets
3
Select a broadcast IP address.
ezRemote Manager locates Neoware thin client appliances on your
network by sending a Simple Network Management Protocol
(SNMP) broadcast request from the server. You need to select a
broadcast IP address (click on the select / deselect indicator to the
left of the address).
Note: The default broadcast address for each network interface
card (NIC) (as determined from your server's registry) is already
selected when the dialog first appears.
Right-click
to change
Click Password
to use a thin cli-
ent access
password with
appliances dis-
covered during
this asset loca-
tion operation.