Sessions
Using the Set
Session Parameters
Dialog
70
Setting Session Parameters
Parameters, you can give each session a name, a delayed start time, set
logging options, and set the option to reboot the appliance after the
session is complete.
Using the Set Session Parameters dialog the user can specify the fol-
lowing parameters:
Log File Name - In the accompanying field, type the name of the
•
log file to either use or create for the update session you are per-
forming.
Log File Properties - Below the Log File Name parameter are two
•
columns of radio buttons that set the properties of the Log file. The
choices available in the first column specify the type of logging you
choose ezRemote Manager to perform. These choices include No
Logging, Full Logging, and Summary Log. The choices in the sec-
ond column specify whether you choose to overwrite or append the
log file specified in the Log File Name field.
Enter Session Name - In the accompanying field, type a name for
•
this session. The name will appear as the tab name in the Task
View. If multiple sessions are defined, you may check each ses-
sion's progress by clicking on the appropriate tab.