Neoware c50 - Thin Client User Manual page 15

4
To change a broadcast IP address, right-click and type a new one.
Add additional broadcast IP addresses by entering them one at a
time in the provided field. clicking
example, you might choose to add addresses for subnet routers.
5
Specify the number and delay between SNMP broadcasts.
Change the default settings only if network traffic interferes with
the discovery of remote thin client appliances.
6
The discovery can be filtered by thin client operating system in
OS Select, limiting the units listed to those appliances running
that operating system.
7
If your Neoware thin client appliances have been protected using
an appliance access password, click on the Password button to
enter the password. The password will be associated with appli-
ances located during this discovery session, and saved with the
asset list database file.
Appliance Access Security dialog:
Enter the Appliance Access Password that is required to access
and change configurations of the remote thin client appliances
that you intend to manage with ezRemote Manager. Click
return to the Broadcast Address dialog.
8
In the Broadcast Address Dialog, Click
Neoware thin client appliances on your network.
Asset Manager
after each entry. For
Add
The Appliance
Access Secu-
rity password is
the device con-
figuration pass-
word.
to locate and list the
OK
Building an asset database
to
OK
15