Configuring Memory - Texas Instruments TravelMate 5000 Series Maintenance Manual

D.1 Introduction
This appendix describes the various areas of RAM within the TM5000 Series
Notebook Computers and how you can make the Notebooks more efficient
by configuring them with the memory management device drivers supplied
with your computer.
D.2 Memory Areas
directly accesses up to 640 KB of
MS-DOS
and commands and for storing temporary data.
access memory beyond this 640-KB limit. The amount of standard default
(640 KB) in the computer is displayed on the Setup Program menu as
RAM
Standard (Memory), and it can be changed in 64-KB increments if required
by your application.
The memory map in Figure D-1 shows the available memory and how it is
used by MS-DOS .

Configuring Memory

for the execution of programs
RAM
cannot directly
MS-DOS
Configuring Memory D-1
D