Configuring Your System - Texas Instruments TravelMate 6100 Series User Manual

Configuring your
system
You are prompted to remove all disks from
the floppy disk drives.
8. Click OK to restart your computer.
Since this is the first time Windows 95 has been
started, the computer will advance through
some initial file setup as it loads.
You are asked to make selections from the
Regional Settings screen.
1. Make selections and press Next.
You are prompted for the keyboard layout
you wish to use.
2. Highlight the keyboard layout you wish to
use and select Next.
Your international settings are loaded. You
are prompted for user information.
3. Enter your name and company and press
Next.
You are prompted to accept or decline the
License Agreement.
4. Select Accept and press Next.
You are prompted for the Certificate of
Authenticity number.
5. Enter the number (located in your Microsoft
Documentation Kit) and press Next.
6. Select Finish to complete the initial startup
of Windows 95.
7. Follow any further instructions on your
screen.
8. When the Date/Time Properties screen
appears, select your time zone, enter the
correct date and time, and press Close.
Loading Windows 95
Getting Started 2-11