V80M-NOT.book Page 70 Tuesday, February 9, 1999 5:14 PM
70
Chapter 2
BIOS Information
PnP/PCI Options
Parameter
PCI IRQ Setting
PCI Slot 1 / 2 / 3
PCI IRQ Sharing
$
Description
Allows you to automatically or
manually configure the Plug-
and-Play (PnP) devices
installed in your system.
Refer to your device manual
for technical information
about the PCI card.
Allow you to manually assign
an interrupt for each PCI
device installed in your
system. When the PCI IRQ
Settings is set to Auto, BIOS
automatically assigns the
available IRQs to the PCI
devices.
Allows you to assign the same
IRQ to two different devices.
Options
Auto or Manual
Yes or No