2.4
PCI System Configuration
The PCI System Configuration allows you to specify the settings for
your PCI devices.
PCI System Configuration
*PCI Slot 2...............[--]
*PCI Slot 3...............[--]
*PCI Slot 4...............[--]
¯ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
2.4.1
PCI IRQ Setting
This parameter allows for
devices. If you use plug-and-play (PnP) devices, you can keep the
default setting
Auto
. The system then automatically configures the
PnP devices. If your PCI device is not a PnP, you can manually
assign the interrupt for each of the device.
Refer to your manual for technical information
about the PCI card.
BIOS Utility
Auto
]
INTA
INTB
INTC
[--]
[--]
[--]
[--]
[--]
[--]
[--]
[--]
® ¬ = Change Setting
F1 = Help,
Esc
=
Auto
or
Manual
configuration of PCI
Page 1/1
INTD
[--]
[--]
[--]
[--]
Exit
2-17