Acer V80M User Manual page 54

V80M-NOT.book Page 44 Tuesday, February 9, 1999 5:14 PM
44 Chapter 2
BIOS Information
Parameter
IDE Secondary
Channel Slave
Total Memory
1st Bank
2nd Bank
Serial Port 1
Serial Port 2
Parallel Port
PS/2 Mouse
Description
Specifies the current
configuration of the IDE device
connected to the slave port of the
secondary IDE channel.
Specifies the total amount of
onboard memory. The memor
size is automatically detected by
BIOS during the (POST). If you
install additional memory, the
system automatically adjusts this
parameter to display the new
memory size.
Indicates the type of DRAM
installed in the DIMM 1 socket.
The None setting indicates that
there is no DRAM installed.
Indicates the type of DRAM
installed in the DIMM 2 socket.
The None setting indicates that
there is no DRAM installed.
Shows the serial port 1 address
and IRQ settings.
Shows the serial port 2 address
and IRQ settings.
Shows the parallel port address
and IRQ settings.
Indicates if there is a mouse
connected to your system. This
is automatically detected by
BIOS.
Format
Drive type,
capacity
Memory size
in MB
DIMM type,
capacity in
MB
DIMM type,
capacity in
MB
Address, IRQ
Address, IRQ
Address, IRQ
Displays
Installed if
there is a
mouse
detected;
otherwise, it
displays
None.