Table of Contents
Advertisement
Advanced Options
PnP / PCI Options
calls the submenu in which you can make the settings for Plug&Play and the PCI bus.
*PnP / PCI Options
*PCI IRQ Setting ...................... [Auto]
*PCI Slot 1 ........................ [--] [--] [--] [10]
*PCI Slot 2 ........................ [--] [--] [10] [--]
*PCI IRQ Sharing ...................... [Yes]
*VGA Palette Snoop .................... [Disabled]
*Plug and Play OS ..................... [Yes]
*Reset Resource Assignments ........... [No]
↑↓ = Move Highlight Bar
Esc = Exit
Example for the PnP / PCI Options submenu
PCI IRQ Setting
defines the setting of the PCI interrupts.
Select Auto, if you use PCI boards supporting Plug&Play. Otherwise select Manual.
PCI Slot 1 / 2
If PCI IRQ Setting is set to Manual, you can set the PCI interrupts in this field.
Multifunctional PCI boards or boards with an integrated PCI-to-PCI bridge can use several PCI
interrupts (INTA#, INTB#, INTC#, INTD#). Monofunctional PCI boards (default) only use one PCI
interrupt (INTA#) per PCI slot.
The PCI interrupts INTA#, INTB#, INTC# and INTD# are available for every PCI slot.
PCI IRQ Sharing
The same interrupt can be assigned simultaneously to several PCI boards.
Select Yes, if you want to assign one interrupt to several boards. Otherwise select No.
VGA Palette Snoop
Select Enabled to activate the Palette Snoop function in VGA boards installed in the device.
28 - English
INTA INTB INTC INTD
F1 = Help
→ ← = Change Setting,
Page 1/1
A26361-K522-Z120-2-7419
Advertisement
Table of Contents
