Service Alarms; Service Alarms List; Alarm Management - Electrolux SMART 726599 Installation And Operating Instructions Manual

- Start time and date (starting date and time of alarm)
- End time and date (ending date and time of alarm)
HACCP
Press button to return to see the symbol of the
HACCP
alarm (AL1). Press
maximum chamber temperature alarm. If nothing is pressed
within 10 seconds we exit from HACCP section.
· HOW TO CHECK THE OLD ALARMS?
Keep pressed the button
AL1 (the last alarm); to select all the other alarms (AL2, AL3, ...)
press .
· HOW LONG ARE THE ALARMS RECORDED?
Forever, or better, until the memory is out of space (maximum
number of recorded alarms: 99).
C.1.7.3 SERVICE ALARMS
To have access to SERVICE ALARMS press
button for 4 seconds; now the display shows the first SERVICE
ALARM stored in the electronic board, for example "b1" (door
open). Press the
SERVICE ALARM stored in the electronic board. If the elec-
tronic board has not stored other SERVICE ALARMS, the dis-
play shows "----". If nothing is pressed within 5 seconds we go
out from SERVICE ALARMS.
· HOW LONG ARE THE ALARMS RECORDED?
Until you have seen the complete alarms list recorded. After
that, they will remain stored 'till a new alarm occurs: the reset
will be automatic.
· HOW TO KNOW IF AN ALARM HAS OCCURRED?
- blinking led of alarm button
- buzzer ON (sound alarm)
· HOW TO CHECK THE ALARMS?
Keep pressed the button
ing the last alarm (a label) thet occurred and the buzzer goes
OFF. In order to reset the alarm, press
button to display the next
HACCP
: the display shows
button to display the next
: the display is show-
display shows "----".
C.1.7.4 SERVICE ALARMS LIST
· Type "b" service alarms
b1
b2
b3
b4
· Type "E" service alarms
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
C.1.7.5 ALARM MANAGEMENT
· Whenever a high chamber temperature alarm occurs the
display shows the label "TEMP" and the buzzer is activated.
· To reset the buzzer press the
second.
· Whenever a type "b" service alarm occurs the display shows
the label code of the alarm and the buzzer is activated.
· Whenever a type "E" service alarm occurs the display shows
the label code of the alarm and the buzzer is activated. IT IS
NECESSARY TO CONTACT TECHNICAL ASSISTANCE.
· To reset the buzzer press the
until the
second.
47
Door is open
Microswitch is broken
Reset HACCP memory
The condenser is dirty
Condenser fan is broken
Missing power supply
Wrong plug positioning
Sensor short-circuited
Sensor is broken or disconnected
Sensor short-circuited
Sensor is broken or disconnected
Sensor short-circuited
Sensor is broken or disconnected
Sensor short-circuited
Sensor is broken or disconnected
Low chamber temperature
Low evaporator temperature
HACCP
button for 1
button for 1